|
|
 |
| |
The Hydropro
Residential Water Conditioners are suitable for applications
up to 72,000 grains of hardness removal capacity at peak
flow rates of up to 21 gpm
Operation of The
Conditioner
Hard water contains dissolved minerals in the form of
calcium (Ca), Magnesium (Mg), as well as metals such as Iron
(Fe), Copper (Cu), Lead (Pb ), Nickel (Ni), Zinc (Zn),
Lithium (Li) and others. Removal of these contaminants is
accomplished by conditioning the water through a
sophisticated ion exchange process. As water flows through
the mineral tank, the dissolved minerals & metals become
attached onto and inside the resin matrix. After a certain
concentration of minerals & metals are removed the media
will become saturated and require regeneration using a
sodium or potassium brine solution.
Conditioning Media -
Hydrolyte 525-2
The exchange media is a high quality, FDA certified,
commercial grade strong acid conditioning (Cation) resin
with a very high whole bead count, no color throw,
physically hard, and is moderately chlorine resistant.
Unlike conventional media, Hydrolyte 525-2 conditioning
resin is designed to react with a combination of brine
solution and Pur-gard or Pur-gard plus to properly purge
itself of the mineral & metal content that it captures. The
media combines high operating capacity with excellent
chemical and physical stability for long dependable life.
Controller/Meter
Regeneration of the system is initiated by a simplified
electronic control timer, which electronically meters
conditioned water flow to the home and makes decisions to
regenerate based on water consumption, lifestyle and program
settings.
Regeneration
These conditioner models are controlled electronically. A
fully programmable microprocessor controls System Protector,
Tank Fill, Percolation, Inject Pur-Gard, Ion Displacement,
Soak, Inject Pur-Gard, Pulsed Vortex and return to service
cycles.
Control Valve
A hydraulically balanced, EPDM diaphragm utilizes a
composite drivetrain. All parts in the water-way are either
stainless steel or composite noryl® materials for a long and
reliable service life.
Resin & Brine Tanks
All models feature a non-corrosive fiberglass resin tank,
with a one piece thermoplastic inner liner. The tank has a
maximum working pressure of 150 psi and a working
temperature up to 120°F. The tank is approved by NSF, UL,
FDA, and meets WQA Standard S-100. All fiberglass tanks
carry a limited lifetime warranty. An 18 x 33 inch brine
tank is included as part of the system. The brine tank is a
combination brine maker and salt storage vessel and is made
of tough, high-density polyethylene. Larger tanks are
available for extra salt storage capacity, if required.
Brine tanks 24" diameter and smaller feature a grid plate
for maximum saturation of brine.
Brine System
Brine refill is automatically controlled by the computer to
provide the exact amount of brine for each regeneration. The
Brine System has a float and safety valve shut-off, which
minimizes the chance of overflowing the brine tank. All
units are equipped with an air check.
Pur-Gard & Pur-Gard
Plus
A high-efficiency digitally-controlled Pur-Gard injector &
reservoir is included with this system to ensure peak
performance and maximum protection from inorganic metals and
minerals while maximizing system efficiency.
|
| |
|
|
 |
 |
 |
| |
Is
water getting worse ?
Decades of explosive population
growth and drought conditions have created extreme water
chemistry conditions that now require specialized
treatment methods to ensure your home is comprehensively
protected from contaminants that could be lurking in your
water.
A broad range of heavy metals,
such as iron, zinc, lead, nickel and copper could be in
your water and potentially compromise the performance of a
traditional water softener.
A regular water softener is no
longer the preferred choice for treating water for home
and business.
Experienced water dealers,
engineers and manufacturers understand the necessity for
at least conditioning water.
AFFORDABLE
SOFT WATER SERVICE
1-800-454-3429 |
|
 |
 |
 |
|
